|
New Aviation Event - N. Little Rock Breakfast Bash, North Little Rock, AR - Saturday, Apr 27, 2024
The 4th Saturday of the month is coming up soon Saturday April 27th. That means it is time to go to North Little Rock Airport KORK and have breakfast in the EAA hangar with about a hundred of our closest friends. From 8:00 till 10:00 we will keep our big buffet bar stocked with loads of mouth watering, fresh cooked breakfast goodies and custom made omelets. You name it and we probably serve it. Among the many things we serve, the blueberry pancakes are sent straight from heaven.
Our cooks strive to make this a breakfast you will be telling your friends about and they simply have to try it for themselves.
We would appreciate a $10. Donation, kids half price, so bring the whole family. Stay comfy in the heated and air conditioned and squeaky clean hangar.
Fly or drive in. Cars use gate 20 which is 1 block south of the main airport entrance on Remount Road.
Bring your classic cars, hot rods, motorcycles and show them off.
Questions ? 419 360-7414
P.S. The hangar is available for parties, birthdays, retirements, class reunions, weddings, receptions or any time you need lots of space.
Full kitchen, sound system, video screen, margarita machine, tables and chairs for 100 plus separate dance floor. Private parking lot.
FunPlacesToFly.com
|
|
|
|
Eddies Footlong Hot Dogs, Meadville, PA
"Short walk to the end of Port Road is Eddies footlong hot dogs Has been a local eating place for over 70 years. Open spring to Labor day. After your hot dog walk across the street to Casey's ice cream." - Submitted by Ronald Kline
|
|
|
Van Zandt County Regional Airport, Wills Point, TX
"My very favorite small town, east Texas airport. Very nicely maintained 3000 foot runway, great terminal area, with pilots lounge that has after hours access, and an airport car! Downtown Wills Point is charming and has two decent restaurants two good restaurants just out of downtown Luna's, Dukes Burgers, the fabulous Four Winds Steakhouse less than 15 minutes from the airport. Excellent staff and their spouses always willing to help. Good gas prices at a modern self serve facility.
Right in between Terrell and Canton if you still need more to do." - Submitted by Hoffman Marett
|
Vans RV 10 - Next-Gen Panel Design for Aircraft: Unveiling the Power of 3D Printing
Vans RV 10 build update - Next-Gen Panel Design for Aircraft: Unveiling the Power of 3D Printing. In this video I walk you through how I have been leveraging my 3D Printer to do some near final designs and layout for my airplane panel, doing everything from panel layout, validating spacing & alignment, creating complex brackets for testing mounting options for my avionics, and using 3D prints to overlay changes on top of the aluminum panel as i make design changes. I have even created a 3D printed glovebox and a mount for my GTX 45AR and by GTR 20 that will be used in the back of the airplane.
A Leaf on the Wind
|